PRODUCTS
News
Mereco MRC 03-1314 Mod 1
This product is a heat cure two part epoxy available in 2.5 gram packs or larger
- Optically clear
- Strong adhesion to glass, ceramic, metals and most plastics without causing fiber core cracking or fiber pistoning.
- Resistant to most chemicals and environmental conditions
- Low stress for multimode, single fiber, multi-fiber, MT, MTRJ, and prizm connectors
- Low outgassing epoxy that meets NASA ASTM E595 requirements
#IMAPS2026 #AdvancedPackaging #Semiconductor #Photonics #FiberOptics #ElectronicsManufacturing #ThermalManagement #Microelectronics #Epoxy #MaterialsScience #ProtavicAmerica
PTS-56227
When heat, protection, and reliability matter, PTS-56227 delivers:
- One-component silicone encapsulant
- Thermally conductive: 1.0 W/m·K
- Wide operating temperature range: -65°C to 150°C
- Flame retardant: UL 94 V-0 at >6 mm
- Excellent adhesion, with no primer required in most applications
- Designed for potting and encapsulating circuit boards, power supplies, and electronic assemblies
- Suitable for demanding automotive, telecommunications, and industrial electronics applications
URB144 Potting & Encapsulation
- Fast gel time: approximately 1 minute 15 seconds at 25°C (ASTM D2471).
- Rapid viscosity build: reaches 100,000 cps in approximately 1 minute 45 seconds.
- Mixed viscosity: approximately 650 cps at 25°C, supporting relatively easy flow during application.
- High hardness: Shore D 82 ±10 after a 24-hour room-temperature cure (ASTM D2240).
- Excellent dielectric strength: >500 volts/mil at 25°C.
- High volume resistivity: 4.6 × 10¹⁴ ohm-cm at 23°C and 1.0 × 10¹⁵ ohm-cm at 30°C.
- High surface resistivity: 3.8 × 10¹⁵ ohm at 23°C and 1.7 × 10¹⁶ ohm at 30°C.
Uraseal is a proud brand of Protavic America
CSR Ratings AWARD
PROTEX INTERNATIONAL awarded with the “GOLD” status
PROTEX INTERNATIONAL, including its subsidiaries both in France and abroad, has been awarded with the “GOLD” status by ECOVADIS, one of the world’s most trusted independent CSR rating agencies, covering four main areas :
-
the environment,
-
fair trade practices,
-
labour practices and human rights and
-
sustainable purchasing.
This distinction places the Group in the Top 5% of companies in the innovation, manufacturing and marketing of its products. This result encourages us to go further with all the parties involved and continue to make progress today and for future generations.
INNOVATIONS
Find out morePROTAVIC is :
3
Production sites in France, the United States and South Korea
14
% of revenue in R&D
Standards
Our certifications
PROTAVIC products meet the highest quality and safety standards:
- REACH: PROTAVIC complies with REACH regulations and has registered all the substances used in our formulas.
- ISO: PROTAVIC also complies with the ISO 9001 v2015 quality management principles. PROTAVIC KOREA is ISO 14001 v2015 certified.
- ITAR-FREE PRODUCTS: PROTAVIC complies with the American ITAR legislation – regulating technologies that can be used by the military industry – by developing “ITAR-Free” components. The aerospace and defense industries rely on these chemical components to export their products to the US.
Our Markets
Areas of use
PROTAVIC‘s expertise – earned and recognized – is found in many industries including aerospace, automotive and electronics.
Striving to always improve, the PROTAVIC team forges close and lasting relationships with its customers and responds to their needs by offering “tailor-made” solutions. This approach has led to PROTAVIC’s success in many markets.
Find out moreFind out more
Protavic
MEMBER OF THE PROTEX INTERNATIONAL GROUP
PROTAVIC is an operational unit of the PROTEX INTERNATIONAL Group.
The Group develops, produces and markets specialty chemicals for use in textiles, paper and agriculture and as additives in the production of paint, construction materials, detergents and lubricants. It has also diversified into electrochemical metallization and biotechnology.