MERECO XLN-470 is a specifically formulated system which provides excellent adhesion to many vinyl substrates. The system may be used to adhere vinyl films in outdoor equipment and in other highly plasticized films. MERECO XLN-470 has wide application in electrical potting and in tying down and sealing vinyl coated wires in electrical apparatus. Additional uses are for vinyl tiles, base boards and pipe.
GENERAL INFORMATION
The useful combining weight ratio of MERECO XLN-470is 1:1. The volume ratio is 5 volumes of base to 6 volumes of activator. The white base when combined with the black activator produces a gray mix which aids in determining when mixing is complete. Thecombined ingredients of this formulated system have a balance of reactivity, strength, toughness and adhesion not usually found in an easy to use product. MERECO XLN-470 cures overnight at 25°C. Adhesive strength continues to improve over a period of 5 days. The system may be cured at moderately elevated temperatures. A cure of 1 to 2 hours at 65°-80°C is recommended. If required, a similar system with lower viscosity is available as MERECO XLN-470LV
PRODUCT DATA
| Color and Form | Base Activator |
White, medium viscosity liquid Black, thixotropic gel |
| Specific Gravity | Base Activator |
1.15 1.00 |
| Mix Ratio | By Weight By Volume |
1:1 5 base to 6 activator |
| Cure Schedule | Normal Cure Speed Cure |
24 hours at 25°C 2 hours at 65° to 80°C |
STORAGE
Protavic XLN-470 should be stored in tightly sealed containers in a dry location at or below normal room temperatures
