ANA-97290 UV Visible Light Curing Adhesive

ANA-97290 is a clear Ultraviolet/ Visible light curing adhesive. It has very low shrinkage during cure for alignment sensitive parts. It is recommended for small electrical/electronic casting and encapsulating applications that require a unique combination of excellent wetting, flow, good thermal expansion properties, thermal shock resistance, and outstanding electrical properties. Adhesion is excellent to metals, most engineered plastics, and glass. Proven applications, lens bonding, back-filling electro-optic devices, and potting LED’s.

APPLICATION PROPERTIES OF UV/VISIBLE LIGHT CURING ADHESIVE

  • ANA-97290 , when fully cured, is highly resistant to moisture, hot water, steam, hot antifreeze solutions, automotive fluids, detergents, gasoline, hydraulic fluids, plasticizers, cleaning agents, acids, and bases
  • ANA-97290 is highly resistant to vibration and can be thermal cycled between –40 and 170°C

TYPICAL PROPERTIES OF CURED ANA-97290

The properties set out below were determined following measurements carried out in the laboratory over a small number of tests. They are values given by way of guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine whether the ANA-97290 resin can be used for the particular application the user has in mind.

PRECAUTIONS IN USE

Refer to the attached material safety data sheet.

PACKAGING

ANA-97290 is available in syringes, 10ml.and 30ml. One liter and 15 liter containers
For sizes and part numbers, contact Protavic America, Inc.