Toughened Two Part Adhesives – ANE-47932

TOUGHENED TWO PART ADHESIVES DEFINITION

ANE-47932 is a toughened two part adhesive. ANE-47932is specifically developed for bonding difficult substrates such as glass, ceramics, metals and engineered plastics. Proven applications are bonding stainless steel to aluminum. It bonds well to glass, rubber, metals, and ceramic. It reaches tensile shear strengths greater than 6000 psi. Proven applications are bonding stainless steel foil to mesh on stencils.

APPLICATION PROPERTIES OF TOUGHENED TWO PART ADHESIVES

  • ANE-47932 , when fully cured, is highly resistant to moisture, antifreeze solutions, automotive fluids, detergents, gasoline, hydraulic fluids, plasticizers, cleaning agents, acids, and bases
  • ANE-47932 is highly resistant to vibration and can be thermal cycled between –40 and 170°F

TYPICAL PROPERTIES OF CURED ANE-47932

The properties set out below were determined following measurements carried out in the laboratory over a small number of tests. They are values given by way of guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine whether the ANE-47932 resin can be used for the particular application the user has in mind.

PRECAUTIONS IN USE

Refer to the attached material safety data sheet.

PACKAGING

ANE-47932 is available in two component kits, and twin syringe cartridges like Mixpac.
For sizes and part numbers, contact Protavic America, Inc.