Toughened Two Part Adhesive – ANE-47204

TOUGHENED TWO PART ADHESIVE DEFINITION

ANE-47204 is a toughened two part adhesive. It is specifically developed for bonding difficult substrates such as glass, ceramics, metals and engineered plastics. Proven applications are bonding fiber optic cables into aluminum end caps, bonding piezoelectric stacked devices, and excellent for electronic potting. It bonds well to glass, rubber, metals, and ceramic.

  • Meets FDA Title 21
  • One to one mix ratio
  • 1 hour handling time
  • Toughened for high strength
  • Excellent chemical resistance

ANE-47204 epoxy resin system was also developed for adhesive and coating applications in accordance with title 21. U.S. code of Federal Regulations, Food and Drug Administration (FDA) chapter1, Sub. Part b, sections 175,105 and 175,300. This 1/1 ratio, two-part adhesive is an effective electrical insulator and it provides low permeability to gases and vapors and good resistance to water, weather, galvanic actions, to petroleum solvents, lubricants and fuels, to mild acids and alkalis and to many other organic and inorganic compounds.

APPLICATION PROPERTIES OF TOUGHENED TWO PART ADHESIVE

  • ANE-47204, when fully cured, is highly resistant to moisture, antifreeze solutions, automotive fluids, detergents, gasoline, hydraulic fluids, plasticizers, cleaning agents, acids, and bases.
  • ANE-47204 is highly resistant to vibration and can be thermal cycled between –40 and 200°F.

TYPICAL PROPERTIES OF CURED ANE-47204

The properties set out below were determined following measurements carried out in the laboratory over a small number of tests. They are values given by way of guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine whether the ANE-47204® resin can be used for the particular application the user has in mind.