Thermal Adhesive & Sealant – PTE-47850

THERMAL ADHESIVE & SEALANT DEFINITION

PTE-47850 is a highly thermally conductive adhesive/sealant and potting compound. PTE-47850 is designed to provide air free potting and casting of electronic devices. PTE-47850is specifically developed for bonding to difficult substrates such as glass, ceramics, and metals. It is available in 4 to 1 ratio side-by-side cartridges and can be applied directly on part. No mixing or measuring required.

APPLICATION PROPERTIES FOR THERMAL ADHESIVE & SEALANT

PTE- 47850, when fully cured, is highly resistant to moisture, hot water, steam, hot antifreeze solutions, automotive fluids, detergents, gasoline, hydraulic fluids, plasticizers, cleaning agents, acids, and bases.

PTE-47850 is highly resistant to vibration and can be thermal cycled between -40 and 150°C.

TYPICAL PROPERTIES OF CURED PTE-47850

The properties set out below were determined following measurements carried out in the laboratory over a small number of tests. They are values given by way of guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine whether the PTE-47850® resin can be used for the particular application the user has in mind.

PRECAUTIONS IN USE

Refer to the attached material safety data sheet.

PACKAGING

PTE-47850 is available in two component kits, and twin syringe cartridges like Mixpac. For sizes and part numbers, contact Protavic America, Inc.