PNE-36567 is a low viscosity, low dielectric constant, two-component epoxy designed for encapsulation or impregnating of high voltage coils and transformers.
- PNE-36567 is recommended for the casting and/or encapsulation of high voltage coils and transformers
- If using PNE-36567 in Kit form, mix two parts together thoroughly, and then degas to 0.5mm Hg or less until all air has been removed (10-15 minutes)
TYPICAL PROPERTIES OF CURED PNE-36567
The properties listed below were determined from measurements carried out in a limited number of tests. These properties are given as guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine weather PNE-36567 is suitable for the userâ€™s particular application. These properties were obtained after curing the PNE-36567 4 hours @ 100°C.
PRECAUTIONS IN USE
Refer to the attached material safety data sheet.
Contact Protavic America, Inc. for more Information.