High Speed Bonding Epoxy – ANE-57103

HIGH SPEED BONDING EPOXY DEFINITION

ANE-57103 is a toughened two part adhesive. ANE-57103 is used for high speed bonding even at lower temperatures. ANE-57103 is specifically developed for bonding difficult substrates such as glass, ceramics, metals and engineered plastics. Proven applications are bonding MRI magnets under full load, and bonding microwave antenna assemblies for use in urban and military cellular communication stations.

APPLICATION PROPERTIES FOR HIGH SPEED BONDING EPOXIES

  • ANA- 57103, when fully cured, is highly resistant to moisture, antifreeze solutions, automotive fluids, detergents, gasoline, hydraulic fluids,plasticizers, cleaning agents, acids, and bases
  • ANE-57103 is highly resistant to vibration and can be thermal cycled between–40 and 150°F

TYPICAL PROPERTIES OF CURED ANE-57103

The properties set out below were determined following measurements carried out in the
laboratory over a small number of tests. They are values given by way of guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine whether the ANE-57103 resin can be used for the particular application the user has in mind.

PRECAUTIONS IN USE

Refer to the attached material safety data sheet.

PACKAGING

ANE-57103 is available in two component kits, and twin syringe cartridges like Mixpac.
For sizes and part numbers, contact Protavic America, Inc.