General Purpose Flexible Potting Compound – ANE-46507

FLEXIBLE POTTING COMPOUND DEFINITION

ANE-46507 is a 100% solids (no VOC) general-purpose epoxy for use as a flexible adhesive/sealant and potting compound. ANE-46507 is specifically developed for bonding to difficult substrates such as glass, ceramics, all plastics, rubbers, and metals. The rheology of ANE-46507 is designed to provide controlled flow properties to enable the user precise application.

APPLICATION PROPERTIES FOR FLEXIBLE POTTING COMPOUNDS

  • ANE-46507 , when fully cured, is highly resistant to moisture, hot water, steam, hot antifreeze solutions, automotive fluids, detergents, gasoline, hydraulic fluids, plasticizers, cleaning agents, acids, and bases.
  • ANE-46507 is highly resistant to vibration and can be thermal cycled between –40 and 150°C.

APPLICATION RECOMMENDATIONS

As with many resin products, crystallization of the resin can happen while in storage. ANE-46507 can be returned to its original state –without any performance and or quality loss– by heating to 60ºC for 1-2 hours. When all the crystals have melted the material should not re-crystallize for 1-2 weeks. To prevent re-crystallization, store in a freezer at –10°C until ready to use.

TYPICAL PROPERTIES OF CURED ANE-46507

The properties set out below were determined following measurements carried out in the laboratory over a small number of tests. They are values given by way of guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine whether the ANE-46505 resin can be used for the particular application the user has in mind.