DEFINITION of ANO-90161 OPTICAL RESIN
PROTAVIC ANO 90161 is a low viscosity, UV curable, non yellowing resin designed for bonding optical devices as lenses, optical fibbers, glass.
The low viscosity of PROTAVIC ANO 90161 improves the wetting of large glass area and is adapted for spin coating dispensing. After curing under ultraviolet radiation, PROTAVIC ANO 90161 exhibits a good adhesion on glass substrates, such as optical fibber, lens and prism. Moreover, the optical bonding made with PROTAVIC ANO 90161 shows good resistance to moisture and high temperature (as re-flow soldering). The good optical properties of PROTAVIC ANO 90161 allow its use on light pathway.
USING PROTAVIC ANO 90161
- Application process: During handle, PROTAVIC ANO 90161 must be kept away from light in order to avoid the uncontrolled starting of polymerization. PROTAVIC ANO 90161 can be easily applied by spin-coating or micro-dispenser.
- UV polymerization: PROTAVIC ANO 90161 cures in a few seconds under ultra-violet radiation. PROTAVIC ANO 90161 requires from 0.2 to 0.5 J/cm² to fully cure under UV radiation.
TYPICAL PROPERTIES OF POLYMERIZED SYSTEM
These values given are typical and do not correspond to a guarantee. The user must, in all cases, by his own studies, determine the optimal polymerization conditions for his own particular application of PROTAVIC ANO 90161.
PROTAVIC ANO 90161 assemblies can be submitted to high process temperature (up to 270°C) for short time (few seconds) without yellowing.
It is recommended to store PROTAVIC ANO 90161 in its hermetically sealed container, protected from moisture and light, at temperature below -20°C. Under these conditions, the maximum period of storage is about 6 months.
PRECAUTIONS OF USE
Refer to enclosed safety data sheet.
PROTAVIC ANO 90161 is delivered 10 g and 30 g opaque syringes.