TWO COMPONENT STRUCTURAL ADHESIVE
ANE-47921NS is a toughened two part epoxy adhesive. ANE-47921NS is specifically developed for bonding difficult substrates such as glass, ceramics, metals and engineered plastics. Proven applications are bonding stainless steel to aluminum. It bonds well to glass, rubber, metals, and ceramic. Ideal for Stencil Bonding without holes. It is equivalent to 3M Scotch-Weld DP460NS epoxy adhesive
- ANE- 47921NS, when fully cured, is highly resistant to moisture, antifreeze solutions, automotive fluids, detergents, gasoline, hydraulic fluids, plasticizers, cleaning agents, acids, and bases
- ANE-47921NS is highly resistant to vibration and can be thermal cycled between -40 and 150°F
- ANE-47921NS has a work life of 30 min. This allows for ease of use and cures fully at room temperature within 48 hours. Handling time is 4-5 Hours
TYPICAL PROPERTIES OF CURED ANE-47921
The properties set out in the supplied PDF were determined following measurements carried out in the laboratory over a small number of tests. They are values given by way of guidance, and do not constitute a guarantee. It will be for the user, in all cases, to carry out their own tests to determine whether the ANE-47921NS resin can be used for the particular application the user has in mind.
PRECAUTIONS IN USE
Refer to the attached material safety data sheet.
ANE-47921NS is available in two component kits, and twin syringe cartridges like Mixpac.
For sizes and part numbers, contact Protavic America, Inc.